317 stainless steel pipes
317 & 317L is a molybdenum bearing austenitic chromium nickel steel similar to type 316, except the alloy content in 317L is somewhat higher. It has a superior corrosion resistance in special applications where it is desired to reduce contamination to a minimum. 317L was developed primarily to resist more effectively the attack of sulfurous acid compounds. However, its proven ability to combat corrosion has widened its use considerably and is now being used for many other industrial applications. The low carbon content of 317L provides immunity to inter-granular corrosion in applications where heavy cross sections cannot be annealed after welding or where low temperature stress relieving treatments are desired.
317L Stainless Steel Chemical Composition
C Max | Cr | Mn Max | Mo Max | Ni | P Max | S Max | Si Max |
0.08% | 24% - 26% | 2.0% | 0.75% | 19% - 22% | 0.045% | 0.03% | 0.75% |
317L Stainless Steel Physical Properties
Density (lb / cu. in.) | Specific Gravity | Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) |
0.29 | 7.9 | 0.12 |
Electrical Resistivity (microhm-cm (at 68 Deg F) | Melting Point (Deg F) | Modulus of Elasticity Tension |
444 | 2550 | 28 |
317L Stainless Steel Mechanical Properties
Hardness, Brinell | Max 217 | Max 217 | ASTM A240 |
Tensile Strength, Ultimate | Min 515 MPa | Min 74700 psi | ASTM A240 |
Tensile Strength, Yield | Min 205 MPa | Min 29700 psi | ASTM A240 |
Elongation at Break | Min 40 % | Min 40 % | ASTM A240 |
Modulus of Elasticity | 200 GPa | 29000 ksi | - |
317L Stainless Steel Specifications
Material | Size | Sch. & Swg. | Specification |
Seamless Pipe | 15 mm NB To 300 mm NB | Sch. 5s, 10s, 40s, 80s, 160s, XXS | ASTM A-312 |
Welded (ERW) Pipe | 15 mm NB To 300 mm NB | Sch. 5s, 10, 40s & 80s | ASTM A-312 |
Welded (ERW) Pipe | 150 mm NB To 600 mm NB | Sch. 5s, 10s, 40s & 80s | ASTM A-358 |
Seamless Tube | 6.35 mm OD To 101.6 mm OD | 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg. | ASTM A-213 |
Welded (ERW) Tube | 6.35 mm OD To 152 mm OD | 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg. | ASTM A-249 |
- Stainless Steel in Grade: TP 304, 304H, 304L, 304LN, 316, 316H, 316L, 316LN, 316Ti, 309, 310, 317L, 321, 347, 409, 410, 420, 430, 446, 202 Etc.
- Special Tube & Pipes: Precision Tubes, Capillary Tube, Fabricated Pipe
- In Form of: Round, Square, Rectangle, Oval, Coil, Flexible Pipe, Shaft, ‘U’ Shape, Hydraulic Tube etc.
- In Length of: Standard length & In Cut length also.
- Test Certificate: Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab. / Under Third Party Inspection with Excise Gate Pass to avail Modvat benefit.
- Other Services: Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Heat Treatment, Bending, Anneling & Pickled, Sand Blasting, Machining Etc.
Get In Touch Now